REPAIR SYSTEM AFTER VIRUS CORRUPT HAL.DLL

a Alptechs- to "tech friends" just to remember -if repair hal.dll doesnt work!

Time Required: Repairing or replacing the boot.ini file usually takes less than 10 minutes
Here's How:
1.Enter Windows XP Recovery Console. The Recovery Console is an advanced diagnostic mode of Windows XP with special tools that will allow you to restore the boot.ini file.

2.When you reach the command line (detailed in Step 6 in the link above), type the following command and then press Enter.

bootcfg /rebuild
3.The bootcfg utility will scan your hard drives for any Windows XP installations and then display the results. Follow the remaining steps to add your Windows XP installation to the boot.ini file.

4.The first prompt asks Add installation to boot list? (Yes/No/All).

Type Y in response to this question and press Enter.

5.The next prompt asks you to Enter Load Identifier:.

This is the name of the operating system. For example, type Windows XP Professional or Windows XP Home Edition and press Enter.

6.The final prompt asks you to Enter OS Load options:.

Type /Fastdetect here and press Enter.

7.Take out the Windows XP CD, type exit and then press Enter to restart your PC.

Assuming that a missing or corrupt boot.ini file was your only issue, Windows XP should now start normally.

NOTE:USE THIS PROCESS AFTER TRY "Expand" command im prompt,to repair hal.dll corrupted , without sucess..

ALIPIO MACHADO -DIADEMA- SP -BRAZIL- AVIRA SECURITY CONSULTANT